Kegco Elite Series Dual Body Nitrogen Regulator | CGA-580
Kegco dual body nitrogen regulator for nitro draft setups
The Kegco Elite Series Dual Body Nitrogen Draft Beer Regulator is built for draft systems where two kegs need to run from the same nitrogen or beer-gas tank at different serving pressures. It is a useful choice for nitro stout, cold brew coffee, or wine service when each line needs its own pressure adjustment.
A dual body regulator gives each output its own adjustment knob and low-pressure gauge instead of forcing both kegs to share one serving pressure. The third gauge helps you monitor the gas cylinder.
Product details
- Kegco model LHU5NDB Elite Series dual body nitrogen regulator
- Compatible with high-pressure tanks that use CGA-580 valves
- Two 5/16 in. barbed outlets for draft gas line connections
- Independent 0-60 PSI pressure adjustment for each regulator body
- Three gauges: two outlet pressure gauges and one tank pressure gauge
- Manual pressure release valves plus internal pressure relief valves that release at 55-65 PSI
- Chrome-plated brass construction with protective rubber gauge boots
- Built-in tank washer and sintered stem filter
Compatibility note
Kegco lists this regulator for high-pressure tanks with CGA-580 valves. Check your cylinder valve before ordering. This is a nitrogen regulator, not a CO2 regulator, so it should be matched with a compatible nitrogen or beer-gas cylinder.
Where it fits in a draft system
This regulator sits at the gas cylinder and controls pressure before gas reaches your draft lines and keg disconnects. For the rest of the gas side, browse our draft regulators, gas cylinders and exchanges, and keg tubing and hardware.
Important California warning
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.