Taprite Dual-Gauge Primary CO2 Regulator | 0-50 PSI

Taprite dual-gauge CO2 regulator for draft beer systems

The Taprite dual-gauge CO2 regulator is a primary gas regulator for home draft systems, kegerators, keezer builds, and standard CO2 cylinders. It connects to a CO2 tank with a CGA320 inlet and sends gas out through a 5/16 in. barbed outlet with a shutoff/check valve.

Use it when you need one primary regulator for carbonating and serving beer, cider, sparkling water, or other kegged beverages from a CO2 system. The two gauges let you monitor tank pressure and regulated output pressure from the same regulator body.

Product details

• Primary CO2 regulator for draft and kegging systems
• Dual gauges for cylinder pressure and regulated output pressure
• 0-50 PSI working pressure range
• CGA320 inlet for standard CO2 cylinders
• Built-in inlet gasket at the tank connection
• 5/16 in. barb gas outlet
• Shutoff valve with check valve helps protect the regulator from backflow
• Large front adjustment knob for tool-free pressure changes

Where it fits in a kegging setup

This regulator sits at the CO2 cylinder and controls pressure before gas reaches your manifold, gas line, and keg disconnects. It is a good fit for single-pressure home draft systems and can also feed a gas manifold when multiple kegs are served at the same pressure.

For the rest of the gas side, browse our CO2 cylinders and exchanges, keg tubing and hardware, and draft regulators.

Setup notes

Confirm that your tank uses a CGA320 CO2 valve before installing the regulator. Attach gas line that fits the 5/16 in. barb, secure the tubing with the proper clamp, open the tank slowly, and leak-check all threaded and barbed connections before serving from a keg.

Important California warning

WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.