Welcome to SoCal Brewing Supply. Brewing something wonderful together!
We are going to be closed July 5th - 13th for vacation. Shipments will go out July 15th. Limited hours available for pick up orders.
Use Discount Code "WELCOME10" for 10% off your first order.
$8.99 flat rate same-day shipping on most domestic orders up to 20 lbs., bulky items are excluded from the shipping offer.
BrewBuilt
This item dropships from our partner and may be subject to longer shipping times. Calculated shipping rates apply.
Couldn't load pickup availability
Brew like a pro with the BrewBuilt Low Rider BrewSculpture. Our brewing systems were first introduced in the 1990’s and now have over two decades worth of R&D and customer feedback built into their design. There’s a reason why top-level breweries like Sierra Nevada and Russian River use a BrewBuilt BrewSculpture for training, ingredient testing and pilot batches.
Touchscreen Control Panel
From heating strike water to whirlpooling hop additions, you’ll orchestrate your entire brew day from our custom designed 7” touchscreen control panel. Unlike other systems, all of the heating elements and pumps can be controlled from a single touchscreen controller. Program your mash steps and the controller will do the rest—cycling heating elements and kicking on pumps to recirculate wort as needed. It also offers programmable delayed start so you can heat your strike water in advance, boil addition timers to remind you when to add hops or clarifiers, as well as manual control of your pumps and linear power control of the electric elements.
Control Panel Key Features:
Automatic HERMS Mashing
Mash temps are maintained via the HERMS coil made from convoluted copper tubing. This top-of-the-line coil design offers unparalleled efficiency while gently heating your wort. Choose from your saved mash schedules or program one on the fly. When the mash begins, the controller will automatically maintain the temperature of the hot liquor bath that the HERMS coil rests in. When the wort temp drops below your set point, the controller will turn on the pump to circulate wort through the coil. You can also set the pump to continuously circulate wort for the whole mash if you prefer, and the HLT will continue to maintain your mash temp automatically. When each mash step is complete, the controller will power up the element to raise the temperature of the HLT and begin the next step. The HERMS coil can also double as your wort chiller when the boil is over and quickly cools wort thanks to the twisted pattern of the copper tubing.
SlingBlade Electric Elements
Our Electric BrewSculpture offers a unique heating element that you won’t find anywhere else. The SlingBlade's unique crescent-shaped design positions all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a dynamic turbulence that evenly distributes heat while creating a vigorous, rolling boil. Other heating elements stick right out into the middle of the kettle or use a full circle design that rings the kettle wall. This can cause an obstruction for immersion chillers or make it difficult to stir without banging into the element. The SlingBlade was designed to avoid these issues. By remaining on one side of the kettle, the element will be out of the way of your immersion chiller, and since the element follows the curvature of the kettle wall, it won't interfere with the flow of wort during whirlpool. And thanks to its ultra-low watt density, the SlingBlade won’t scorch your wort and cause caramelization issues.
The Ultimate Sparge Arm
No other system protects against hot side aeration quite like the BrewSculpture. While other systems simply pump wort back to the top of the mash tun and let it splash back down over the grain bed, the Ultimate Sparge Arm will make sure your wort circulates with virtually zero aeration. The Ultimate Sparge Arm features adjustable height and adjustable flow. Depending on what beer you’re brewing, the surface of the mash will be at different heights. Simply lower the sparge arm to just below the surface of the mash and your recirculation will be splash-free. The ball valve at the inlet of the sparge arm allows you to dial in the flow and reduce turbulence as you see fit.
Custom Welded Frame Made in the USA
Every BrewBuilt BrewSculpture is made to order and built around a custom TIG welded 304 stainless steel stand. While other companies cut corners by using generic stainless steel tables for their systems, our extra beefy stand is fabricated in our California-based metal shop and designed to outlive even you. Every stand comes with rolling casters and folding handlebar so you can easily move your system with ease whenever needed.
What Sets the Digital Electric BrewSculpture Apart?
Key Features:
Power Requirements
Heating Element Wattage:
Size | HLT | Boil Kettle |
10 gal | 5750W | 5000W |
20 gal | 5750W | 5750W |
1 bbl | 2x 5750W | 2x 5750W |
Stainless Frame Dimensions:
L & XL Frame | XXL Frame | |
Length | 73 in. | 80 in. |
Width | 19.5 in. | 19.5 in. |
Height | 29 in. | 25 in. |